HYDRAULIC BASICS 
HYDRAULIC COMPONENTS 
HYDRAULIC SYSTEM 
HYDRAULIC SYMBOLS 
HYDRAULIC STANDARDS 
HYDRAULIC CALCULATORS 
HYDRAULIC TOOLS 
BUYER’S GUIDES 
SAE J1926 Standard: Straight Thread O-Ring Boss (ORB) Port Guide
Contents
- 1 1. What Is SAE J1926 Standard?
- 2 2. Why Was SAE J1926 Developed?
- 3 3. Understanding Straight Thread O-Ring Boss (ORB) Ports
- 4 4. SAE J1926 Port Design
- 5 5. SAE J1926 Thread Sizes and Dash Numbers
- 6 6. SAE J1926 Port Dimensions Chart
- 7 7. SAE J1926 O-Ring Specifications
- 8 8. Pressure Ratings of SAE J1926 Ports
- 9 9. SAE J1926-1 vs SAE J1926-2
- 10 10. SAE J1926 Port Types
- 10.1 Fixed Ports
- 10.2 Characteristics
- 10.3 Typical Applications
- 10.4 Adjustable Ports
- 10.5 Advantages
- 10.6 Typical Components
- 10.7 Straight Ports
- 10.8 Benefits
- 10.9 Elbow Ports
- 10.10 Common Applications
- 10.11 Tee Ports
- 10.12 Cross Ports
- 10.13 Manifold Ports
- 10.14 Cartridge Valve Ports
- 10.15 Selecting the Appropriate Port Type
- 11 11. SAE J1926 vs Other Hydraulic Port Standards
- 12 SAE J1926 vs NPT
- 13 12. SAE J1926 vs ISO 6149
- 14 13. How SAE J1926 Ports Seal
- 14.1 The Basic Sealing Principle
- 14.2 Step 1: Thread Engagement
- 14.3 Step 2: O-Ring Contact
- 14.4 Step 3: O-Ring Compression
- 14.5 Step 4: Pressure-Assisted Sealing
- 14.6 Step 5: Elastic Recovery
- 14.7 Why This Design Works So Well
- 14.8 Factors That Influence Sealing Performance
- 14.9 O-Ring Condition
- 14.10 Surface Finish
- 14.11 Installation Torque
- 15 Frequently Asked Questions (FAQ)
- 16 Conclusion
Hydraulic systems operate under extremely high pressures, where even a minor leak can reduce efficiency, contaminate the environment, and lead to costly downtime. One of the most effective ways to achieve reliable, leak-free hydraulic connections is by using standardized port designs. Among these, the SAE J1926 standard has become one of the most widely adopted specifications for straight thread O-ring boss (ORB) ports in North America and many global hydraulic applications.
Unlike tapered thread standards that rely on thread interference to create a seal, SAE J1926 separates the mechanical function of the threads from the sealing function of the O-ring. This design significantly improves sealing performance, reduces the risk of thread damage, and allows fittings to be assembled and disassembled multiple times without compromising reliability.
Today, SAE J1926 ports are commonly found in hydraulic pumps, valves, cylinders, manifolds, filters, and mobile equipment used in industries such as construction, agriculture, mining, manufacturing, marine, and oil & gas. Because the standard defines precise port dimensions, thread specifications, and sealing surfaces, components from different manufacturers can be used together with confidence.
This guide provides a comprehensive overview of the SAE J1926 standard, including its design principles, port dimensions, thread sizes, O-ring requirements, pressure capabilities, installation practices, comparisons with other hydraulic standards, and practical applications. Whether you are a hydraulic engineer, maintenance technician, equipment designer, or purchasing specialist, understanding SAE J1926 will help you select compatible components and build more reliable hydraulic systems.
1. What Is SAE J1926 Standard?
The SAE J1926 standard is a specification developed by SAE International that defines the dimensions, thread requirements, and sealing characteristics for straight thread O-ring boss (ORB) ports used in hydraulic fluid power systems. The standard establishes a uniform method for designing threaded ports that provide high-pressure, leak-free connections while allowing components from different manufacturers to be interchangeable.
Unlike traditional tapered pipe threads, which seal through thread deformation, SAE J1926 uses UN/UNF straight threads only to retain the fitting mechanically. The actual hydraulic seal is created by compressing an elastomeric O-ring against a precisely machined spot face in the port. This separation of mechanical retention and sealing results in a more reliable connection, especially in systems subjected to vibration, pressure cycling, and frequent maintenance.
The SAE J1926 standard primarily covers ports intended for use with SAE O-ring boss (ORB) fittings, which are widely used in hydraulic equipment operating at medium to very high pressures. Standardized port geometry ensures consistent sealing performance while simplifying manufacturing, installation, inspection, and maintenance.
Today, SAE J1926 is one of the most widely used hydraulic port standards in North America and is commonly specified by manufacturers of:
- Hydraulic pumps
- Directional and proportional control valves
- Hydraulic cylinders
- Manifolds
- Pressure regulators
- Filters
- Hydraulic power units
- Construction and agricultural machinery
- Industrial automation equipment
One of the key strengths of SAE J1926 is its compatibility with standardized ORB fittings, making replacement components readily available from numerous manufacturers. This reduces inventory complexity and improves maintenance efficiency across a wide range of hydraulic systems.
The standard has also evolved over time into multiple parts to address different application requirements. For example, SAE J1926-1 specifies complete port dimensions for straight thread O-ring boss ports, while SAE J1926-2 focuses on ports designed for adjustable straight thread stud ends. Together, these documents provide comprehensive guidance for designing and manufacturing reliable hydraulic connections.
By defining standardized dimensions, tolerances, thread forms, and sealing surfaces, SAE J1926 has become an essential reference for engineers designing hydraulic equipment that requires durable, interchangeable, and leak-resistant fluid connections.
2. Why Was SAE J1926 Developed?
Before the introduction of SAE J1926, many hydraulic systems relied on tapered pipe thread standards such as NPT (National Pipe Taper). While tapered threads were widely available and relatively easy to manufacture, they were never ideal for modern high-pressure hydraulic applications. Their sealing method depended on thread interference and thread sealants, making installation more sensitive to torque, thread condition, and operator experience.
As hydraulic systems evolved to operate at higher pressures and with stricter reliability requirements, the industry needed a standardized port design that could provide consistent, leak-free performance while simplifying assembly and maintenance. SAE International developed the SAE J1926 standard to address these challenges by introducing a straight thread port that uses an elastomeric O-ring as the primary sealing element.
Eliminate Thread-Based Sealing
One of the main objectives of SAE J1926 was to separate the mechanical retention function of the threads from the hydraulic sealing function. In traditional tapered thread systems, the threads perform both roles simultaneously, which can lead to several problems:
- Thread galling during installation
- Difficulty achieving consistent torque
- Increased risk of leakage
- Permanent thread deformation
- Reduced service life after repeated assembly
SAE J1926 eliminates these issues by using UN/UNF straight threads solely to hold the fitting in place, while the O-ring creates the pressure-tight seal against a precision-machined port face.
Improve Leak Prevention
Hydraulic fluid leaks are more than just maintenance concerns. They can reduce system efficiency, contaminate products, create environmental hazards, and increase operating costs.
The O-ring sealing design specified by SAE J1926 provides several advantages over thread sealing methods:
- Uniform sealing around the entire circumference
- Excellent sealing under pressure fluctuations
- Reliable performance during vibration
- Reduced dependence on thread sealants
- Lower probability of installation errors
Because the O-ring is compressed between two machined surfaces, sealing performance remains consistent even after multiple installation cycles.
Support High-Pressure Hydraulic Systems
Modern hydraulic equipment often operates at pressures exceeding 3,000 psi (207 bar), with many systems reaching 5,000–6,000 psi (345–414 bar) or higher. Under these conditions, even minor imperfections in thread sealing can result in leaks or component failure.
SAE J1926 was designed specifically to support these demanding applications by providing:
- Accurate port dimensions
- Controlled O-ring compression
- High mechanical strength
- Excellent resistance to pressure cycling
- Long-term sealing reliability
These characteristics make the standard suitable for both mobile and industrial hydraulic systems.
Standardize Manufacturing
Before standardized ORB ports became common, manufacturers often produced proprietary port geometries. This made replacement fittings difficult to source and limited compatibility between suppliers.
SAE J1926 established a universal dimensional standard that allows:
- Interchangeable components
- Consistent machining practices
- Simplified quality inspection
- Easier maintenance and repairs
- Reduced inventory requirements
Equipment manufacturers can now design products using standardized ports while maintenance teams can obtain compatible replacement fittings from multiple suppliers.
Improve Assembly and Serviceability
Maintenance personnel frequently remove and reinstall hydraulic fittings during equipment servicing. Thread-based sealing systems often require thread sealant replacement or suffer thread damage after repeated use.
SAE J1926 improves serviceability by allowing fittings to be assembled and disassembled multiple times with minimal wear. In most cases, replacing the O-ring is sufficient to restore the connection to its original sealing performance, provided the sealing surfaces remain undamaged.
Meet Growing Industry Demands
The adoption of hydraulic automation, mobile equipment, industrial machinery, and advanced manufacturing systems increased the need for dependable hydraulic connections. SAE J1926 provides a standardized solution that meets the industry’s requirements for:
- Higher operating pressures
- Improved reliability
- Faster assembly
- Lower maintenance costs
- Global component interchangeability
As a result, SAE J1926 has become one of the most widely accepted hydraulic port standards in North America and is recognized by equipment manufacturers worldwide.
3. Understanding Straight Thread O-Ring Boss (ORB) Ports
The Straight Thread O-Ring Boss (ORB) connection defined by SAE J1926 is one of the most reliable port designs used in hydraulic fluid power systems. Unlike tapered pipe threads that rely on thread deformation to create a seal, an ORB connection uses straight threads for mechanical retention and an elastomeric O-ring for sealing. This design significantly improves leak resistance, installation consistency, and long-term durability.
Understanding how an ORB port works is essential for selecting compatible fittings, designing hydraulic components, and preventing installation errors.
What Is an ORB Port?
An O-Ring Boss (ORB) port is a threaded hydraulic port with a precisely machined sealing surface that accommodates an O-ring installed on the fitting. The fitting screws into the port using UN/UNF straight threads, while the O-ring is compressed against the port’s spot face to create a pressure-tight seal.
Unlike pipe thread systems, the threads themselves are not intended to prevent fluid leakage. Their only purpose is to secure the fitting mechanically and maintain the correct compression of the O-ring.
An ORB connection consists of three primary elements:
- A straight-threaded port machined according to SAE J1926 dimensions
- A compatible ORB fitting with UN/UNF threads
- An elastomeric O-ring installed on the fitting
This simple but effective arrangement provides highly reliable sealing under both static and dynamic operating conditions.
How ORB Sealing Works
The sealing mechanism is based on controlled O-ring compression rather than thread interference.
During installation:
- The fitting is threaded into the port.
- The threads pull the fitting toward the sealing surface.
- The O-ring contacts the machined spot face.
- Continued tightening compresses the O-ring by a specified amount.
- The compressed O-ring fills microscopic surface imperfections, creating a leak-tight seal.
When hydraulic pressure is applied, the fluid pressure pushes the O-ring more firmly against the sealing surfaces, enhancing the seal rather than weakening it. This pressure-assisted sealing characteristic is one of the reasons ORB ports perform so well in high-pressure hydraulic systems.
Separation of Mechanical and Sealing Functions
One of the defining features of SAE J1926 is the separation of the two primary functions of a threaded connection:
| Function | Component Responsible |
|---|---|
| Mechanical retention | Straight threads |
| Hydraulic sealing | O-ring |
This separation offers several important advantages:
- Threads are subjected mainly to tensile loading rather than sealing stresses.
- Thread wear has minimal impact on sealing performance.
- The risk of thread galling is reduced.
- Thread sealants are generally unnecessary.
- Assembly torque is more consistent and predictable.
Because the threads no longer perform the sealing function, the connection is easier to install correctly and less susceptible to leaks caused by improper tightening.
Why Straight Threads Are Used
Straight threads provide more accurate positioning of the fitting than tapered threads. Since the fitting advances a predictable distance with each turn, engineers can design the port so that the O-ring is compressed within an optimal range.
This precise positioning ensures:
- Uniform O-ring compression
- Repeatable installation
- Reduced risk of over-compression
- Longer O-ring service life
- Improved sealing consistency
The result is a connection that maintains its integrity even under vibration, thermal expansion, and repeated pressure cycling.
Advantages of ORB Ports
Compared with traditional tapered pipe thread connections, ORB ports offer several significant benefits:
- Excellent leak resistance
- High-pressure capability
- Reusable fittings
- Minimal dependence on installation technique
- Faster assembly
- Easier maintenance
- Reduced thread damage
- Better vibration resistance
- Longer service life
- Standardized interchangeability between manufacturers
These advantages have made SAE J1926 ORB ports the preferred choice for hydraulic pumps, valves, manifolds, cylinders, filters, and many other fluid power components.
Typical Applications of ORB Ports
Straight Thread O-Ring Boss ports are commonly found in:
- Hydraulic pumps
- Directional control valves
- Pressure relief valves
- Hydraulic cylinders
- Power units
- Manifold blocks
- Mobile hydraulic equipment
- Agricultural machinery
- Construction equipment
- Mining machinery
- Material handling systems
- Industrial hydraulic presses
Wherever high-pressure hydraulic fluid must be contained reliably with minimal leakage, SAE J1926 ORB ports are among the most trusted connection solutions available.
4. SAE J1926 Port Design
The performance of an SAE J1926 connection depends not only on the fitting but also on the precise geometry of the port itself. The standard specifies exact dimensions, tolerances, and surface requirements to ensure that the O-ring is compressed correctly and the fitting is securely retained. Even small deviations in port machining can lead to leaks, premature O-ring failure, or thread damage.
Unlike tapered pipe threads, where sealing depends largely on thread interference, the SAE J1926 port is engineered so that each feature has a specific mechanical or sealing function.
Main Components of an SAE J1926 Port
A standard SAE J1926 port consists of several machined features:
- Straight internal UN/UNF threads
- Precision-machined spot face
- O-ring sealing area
- Thread relief
- Chamfer at the port entrance
- Controlled port depth
Each feature contributes to the reliability of the hydraulic connection.
Straight Threads
SAE J1926 uses Unified National Fine (UNF) straight threads rather than tapered threads. The threads are responsible only for pulling the fitting into the port and maintaining the proper compression of the O-ring.
Key characteristics include:
- Straight (parallel) thread profile
- High mechanical strength
- Precise positioning of the fitting
- Excellent repeatability during installation
- Reduced thread wear compared to tapered threads
Because the threads do not provide the hydraulic seal, thread sealants such as PTFE tape or pipe dope are generally unnecessary.
Spot Face
The spot face is one of the most critical features of the SAE J1926 port. It is a flat, smooth surface located at the opening of the port where the O-ring is compressed.
Its functions include:
- Providing a uniform sealing surface
- Supporting even O-ring compression
- Preventing extrusion of the O-ring
- Minimizing leakage paths
The spot face must be machined to a specified surface finish and remain free from scratches, dents, or machining marks that could compromise sealing performance.
O-Ring Sealing Area
Unlike ports with dedicated O-ring grooves, the SAE J1926 port relies on the groove located on the fitting. As the fitting is tightened, the O-ring seats against the spot face of the port and deforms elastically to create a pressure-tight seal.
The sealing area must provide:
- Uniform O-ring compression
- Correct squeeze percentage
- Adequate support under pressure
- Smooth surface finish
If the sealing surface is damaged, replacing the O-ring alone may not eliminate leakage.
Chamfer
A chamfer is machined at the entrance of the threaded port to:
- Guide the fitting during installation
- Protect the first thread from damage
- Prevent O-ring cutting during assembly
- Improve manufacturing consistency
Proper chamfer dimensions reduce the risk of cross-threading and make assembly easier, particularly in production environments.
Thread Relief
At the bottom of the threaded section, a relief area allows the fitting to fully engage without interference from incomplete threads or machining transitions.
Thread relief helps:
- Ensure complete thread engagement
- Reduce stress concentration
- Improve machining quality
- Prevent interference during tightening
Port Depth
SAE J1926 specifies the minimum port depth required for each thread size. Correct depth ensures that:
- The fitting threads engage fully.
- The O-ring reaches the sealing surface at the correct position.
- Proper torque produces the intended O-ring compression.
A port that is too shallow may prevent full thread engagement, while an excessively deep port can reduce sealing effectiveness if the O-ring does not compress sufficiently.
Surface Finish Requirements
Surface quality plays an essential role in sealing performance.
Critical surfaces include:
- Spot face
- Thread flanks
- Chamfer
- Port entrance
A smooth surface minimizes leakage paths while avoiding sharp edges that could damage the O-ring during installation.
Manufacturing Accuracy
Because ORB ports rely on controlled O-ring compression, machining tolerances are tighter than those required for conventional pipe threads. Manufacturers typically use CNC machining, thread gauges, and coordinate measuring machines (CMMs) to verify compliance with SAE J1926 dimensional requirements.
Accurate machining results in:
- Consistent sealing performance
- Improved interchangeability
- Longer component life
- Reduced maintenance costs
5. SAE J1926 Thread Sizes and Dash Numbers
One of the key advantages of the SAE J1926 standard is its standardized sizing system. Instead of relying solely on nominal thread dimensions, hydraulic fittings are commonly identified using dash numbers, making it easier to select compatible ports and fittings across different manufacturers.
Each dash size corresponds to a specific thread diameter, thread pitch, and O-ring size, ensuring consistent interchangeability throughout the hydraulic industry.
Understanding Dash Numbers
SAE J1926 fittings are typically identified by a dash number preceded by a minus sign.
Examples include:
- -02
- -03
- -04
- -06
- -08
- -10
- -12
- -16
- -20
- -24
- -32
The dash number is an industry designation and does not directly represent the thread diameter. Instead, it corresponds to a standardized fitting size that includes the correct thread dimensions and O-ring specifications.
Thread Designations
Each dash size uses a specific UN or UNF thread.
For example:
| Dash Size | Typical Thread |
|---|---|
| -02 | 5/16-24 UNF |
| -04 | 7/16-20 UNF |
| -06 | 9/16-18 UNF |
| -08 | 3/4-16 UNF |
| -10 | 7/8-14 UNF |
| -12 | 1-1/16-12 UN |
| -16 | 1-5/16-12 UN |
| -20 | 1-5/8-12 UN |
| -24 | 1-7/8-12 UN |
| -32 | 2-1/2-12 UN |
These standardized thread forms allow fittings from different manufacturers to mate correctly with SAE J1926 ports.
Fine Threads for Better Performance
SAE J1926 primarily uses Unified National Fine (UNF) threads because they offer several advantages over coarse threads:
- Greater tensile strength
- More precise axial positioning
- Increased thread engagement
- Better resistance to vibration loosening
- Improved load distribution
Fine threads also enable more accurate control of O-ring compression during installation.
Thread Engagement
Adequate thread engagement is essential for maintaining both mechanical strength and sealing performance.
Proper engagement provides:
- High pull-out resistance
- Uniform load distribution
- Stable fitting alignment
- Correct O-ring compression
Insufficient engagement may result in stripped threads or fitting failure under high hydraulic pressure.
Selecting the Correct Size
Choosing the correct SAE J1926 port size depends on several engineering factors:
- Flow rate
- Pressure rating
- Tube or hose size
- Available installation space
- Component wall thickness
- System pressure losses
Engineers typically size the port based on hydraulic flow requirements first, then verify that the selected thread size meets the required pressure rating and mechanical strength.
Interchangeability
Because thread sizes and dimensions are standardized, an SAE J1926 fitting from one manufacturer should fit any properly machined SAE J1926 port of the same dash size. This interchangeability simplifies maintenance, reduces inventory requirements, and provides greater flexibility when sourcing replacement components.
6. SAE J1926 Port Dimensions Chart
One of the primary purposes of SAE J1926 is to standardize the dimensions of straight thread O-ring boss ports. By defining precise thread diameters, pitches, sealing surfaces, and port depths, the standard ensures that fittings and ports manufactured by different companies remain fully interchangeable.
Engineers, machinists, inspectors, and maintenance personnel rely on these dimensional specifications to design, manufacture, inspect, and service hydraulic components.
Information Included in an SAE J1926 Port Chart
A complete SAE J1926 dimensions chart typically contains the following parameters:
- Dash size
- Thread designation
- Major thread diameter
- Thread pitch
- Recommended tap drill size
- Minimum thread length
- Spot face diameter
- Spot face depth
- Minimum port depth
- Chamfer dimensions
- Thread class
- Recommended O-ring size
These values ensure that the fitting achieves the correct thread engagement while compressing the O-ring by the specified amount.
Typical SAE J1926 Port Size Range
The standard covers a wide range of port sizes suitable for everything from compact instrumentation circuits to heavy-duty hydraulic equipment.
Common sizes include:
- -02
- -03
- -04
- -05
- -06
- -08
- -10
- -12
- -14
- -16
- -20
- -24
- -32
Smaller ports are commonly used on gauges, pilot circuits, and instrumentation, while larger sizes are found on pumps, manifolds, cylinders, and high-flow hydraulic systems.
Why Accurate Dimensions Matter
Every dimension specified in SAE J1926 affects sealing performance.
For example:
- Incorrect thread diameter may prevent proper engagement.
- Excessive port depth may reduce O-ring compression.
- Insufficient spot face diameter can damage the O-ring.
- Poor chamfer geometry may cut the O-ring during installation.
- Incorrect thread pitch prevents the fitting from seating properly.
Even a minor dimensional error can compromise the integrity of a high-pressure hydraulic connection.
Measuring SAE J1926 Ports
To verify compliance, manufacturers and inspectors commonly use:
- Thread plug gauges
- Thread ring gauges
- Calipers
- Micrometers
- Depth gauges
- Coordinate Measuring Machines (CMM)
- Optical comparators
These tools ensure that the machined port conforms to the dimensional requirements specified by the standard.
Example SAE J1926 Port Dimensions
Below is a simplified example of common SAE J1926 thread sizes. Actual design and manufacturing should always follow the official SAE standard and the fitting manufacturer’s specifications.
| Dash Size | Thread Size | Threads per Inch (TPI) |
|---|---|---|
| -02 | 5/16-24 UNF | 24 |
| -03 | 3/8-24 UNF | 24 |
| -04 | 7/16-20 UNF | 20 |
| -05 | 1/2-20 UNF | 20 |
| -06 | 9/16-18 UNF | 18 |
| -08 | 3/4-16 UNF | 16 |
| -10 | 7/8-14 UNF | 14 |
| -12 | 1-1/16-12 UN | 12 |
| -16 | 1-5/16-12 UN | 12 |
| -20 | 1-5/8-12 UN | 12 |
| -24 | 1-7/8-12 UN | 12 |
| -32 | 2-1/2-12 UN | 12 |
In the following sections, we’ll examine O-ring specifications, pressure ratings, torque requirements, and installation practices that work together with these standardized port dimensions to ensure safe and leak-free hydraulic connections.
Contents1 1. What Is the ISO 1179 Standard?1.1 Purpose of the Standard1.2 Why the Sealing Arrangement Matters2 2. Overview of ISO 1179 Parts 1–42.1 ISO 1179-1: Threaded Ports2.2 ISO 1179-2: Stud Ends with Type E Sealing2.3 ISO 1179-3: Stud Ends with Types G and H Sealing2.4 ISO 1179-4: Stud Ends with Type B Sealing3 3. […]
Contents1 1. What Is ISO 6149?1.1 What Does the Standard Cover?1.2 Why Is ISO 6149 Important?2 2. Overview of the ISO 6149 Series2.1 ISO 6149-1: Ports2.2 ISO 6149-2: Heavy-Duty Stud Ends2.3 ISO 6149-3: Light-Duty Stud Ends2.4 ISO 6149-4: Port Plugs3 3. How ISO 6149 Connections Work3.1 The O-Ring Sealing Principle3.2 Non-Adjustable Stud Ends3.3 Adjustable Stud […]
Contents1 1. What Is the ISO 6022 Standard?2 2. Scope and Limitations of ISO 60223 3. Main Components of an ISO 6022 Hydraulic Cylinder4 4. Cylinder Bore and Piston Rod Diameters5 5. Mounting Types and Designations6 6. Mounting Dimensions and Interchangeability7 7. Pressure Ratings and Operating Considerations8 8. ISO 6022 vs. ISO 6020-2 Hydraulic Cylinders9 […]
Contents1 1. What Is the ISO 3601 O-Ring Standard?1.1 Purpose of ISO 36011.2 Applications of ISO 3601 O-Rings2 2. ISO 3601 Standard Parts Explained2.1 ISO 3601-1: Inside Diameters, Cross-Sections, Tolerances and Designation Codes2.2 ISO 3601-2: Housing Dimensions for General Applications2.3 ISO 3601-3: Quality Acceptance Criteria2.4 ISO 3601-5: Elastomeric Materials for Industrial Applications3 3. ISO 3601 […]
Contents1 1. What Is the DIN 2353 Standard?1.1 DIN 2353 Fitting Series1.2 DIN 2353 and ISO 8434-12 2. DIN 2353 Tube Size Terminology2.1 Tube Outside Diameter (OD)2.2 Tube Wall Thickness2.3 Tube Inside Diameter (ID)2.4 Metric Tube Size vs. Nominal Pipe Size3 3. DIN 2353 Tube Series: LL, L, and S3.1 LL – Extra Light Series3.2 […]
Contents0.1 1. What Is the ISO 6162 Standard?0.1.1 Purpose of ISO 61620.1.2 Components Covered by ISO 61620.1.2.1 Flange Head0.1.2.2 Hydraulic Port0.1.2.3 Split Flange Clamps0.1.2.4 One-Piece Flange Clamps0.1.2.5 O-Ring Seal0.1.2.6 Mounting Bolts0.1.3 Advantages of ISO 6162 Flange Connections1 2. ISO 6162-1 and ISO 6162-2 Explained1.0.1 ISO 6162-11.0.2 ISO 6162-21.0.3 Key Differences Between ISO 6162-1 and ISO […]
Contents1 1. What Is the ISO 4406 Standard?1.1 Purpose of ISO 44061.2 Current ISO 4406 edition1.3 Where ISO 4406 is used1.4 What ISO 4406 does not indicate2 2. How the ISO 4406 Cleanliness Code Works2.1 Understanding cumulative particle counts2.2 Converting particle counts into range numbers2.3 Why the code numbers do not represent particle sizes2.4 Particle […]
Contents1 1. What Is ISO 18752?1.1 Purpose of ISO 187521.2 Constant-pressure concept1.3 Products covered by the standard1.4 Suitable hydraulic fluids1.5 Requirements covered by ISO 187521.6 Limitations of the standard2 2. ISO 18752 Hose Classification System2.1 ISO 18752 pressure classes2.2 Nominal hose sizes2.3 ISO 18752 performance grades2.4 Standard and compact hose types2.5 Meaning of each hose […]
Contents1 1. What Is SAE J518 Standard?2 2. Understanding SAE J518 Flange Connections2.1 2.1 Main Components of an SAE J518 Connection2.2 2.2 How the Connection Works2.3 2.3 Advantages of SAE J518 Flange Connections2.4 2.4 Limitations of SAE J5182.5 2.5 Typical Applications3 3. SAE J518 Types and Series3.1 3.1 Code 61 (Standard Pressure)3.2 3.2 Code 62 […]
Contents1 1. What Is SAE J343 Standard?2 2. Scope and Requirements of SAE J3432.1 Products Covered2.2 Hydraulic Systems Covered2.3 Performance Requirements2.4 Test Conditions2.5 Relationship with Other SAE Standards2.6 Why the Scope Matters3 3. Key Test Methods in SAE J3433.1 3.1 Proof Pressure Test3.2 3.2 Burst Pressure Test3.3 3.3 Leakage Test3.4 3.4 Impulse Pressure Test3.5 3.5 […]